Storage cupboards under the boiler, by Nicky

Description

In this project, two cabinets have been installed that will stand in front of the boiler. Kitchen utensils and other items can be stored in these cabinets. A place has also been created between the two cupboards where the ironing board can be stored. These cabinets also cover most of the pipes.

Clear MDF storage cabinets

First I varnished all the MDF panels. I used a pore filler for the end edges so that they do not absorb the paint too hard. When the panels were all dry, I first nailed the cabinets to make it easier to work. Then I pre-drilled and screwed them in place. By nailing them they stay in place better and the work is easy to do alone.

Before the side walls were attached, I first made the holes for the shelf supports, because this is easier to do. when the panel is in place. Then I came out of the 'closet' for the ironing board, cutouts for the pipes. This way I could easily slide it over this.

Finally, I drilled the hinge holes and attached the mounting plates. Afterwards, simple handles were placed on the doors and it was done!

Custom storage cabinets

94.6 cm wide x 95.0 cm high