Radiator conversion with Plywood, by Michelle

Description

A conversion for the radiator in the living room of plywood. I had the conversion completely sawn to size except for the miter and mounted on slats.

Conversion around the radiator

Boards were sawn to size for the top and the front. We mitered the planks on one side so that they fit together nicely.

They were then mounted on 3 slats. There are two slats at the front and one at the top. Where the planks meet each other with the miter, I used wood glue for strength.

The side panel has been mitered on two sides for a fitting whole.

Attention! The miter was not cut to size by OPMAATZAGEN.nl.

Custom conversion

120.0 cm wide, 20.0 cm deep, 83.0 cm high .