Project Blinds, by Jochem

Description

Had 2 parts of 185. cm by 18.0 cm sawn via opmaatzagen.nl, then the end edges were mitered on both sides and mounted against the wall with 39 screws that we mounted the 30cm on the bars.

Work description: how did you realize your project

Because we really wanted to have blinds above the sliding doors in our new home, but unfortunately the extension is made of HSB.
And we only found plasterboard on the inside, so we had to come up with a solution on the bars of the HSB to mount all that weight to the wall correctly.
It was also the intention that the tilt and tilt system of the sliding doors can also work while the blinds are down, so that is why we used 40mm thick plywood for this.

Final size: What are the outside dimensions?

Final size: What are the outside dimensions?

Final size: What are the outside dimensions? h3>

264.0 cm long, by 18.0 cm wide and 40 mm thick